| Specifications |
|
| Reading System/Optics |
|
| Film type
|
35mm/Advanced Photo System
film (Advanced Photo System adapter optional)
(positive or
negative, color or monochrome) |
|
| Reading
resolution |
2,592-pixel monochrome
linear CCD
2,700 optical dpi |
|
| Film adapter
|
Slide mount adapter
(MA-20)
Strip adapter (2 to 6 frames) (SA-20)
Advanced Photo
System adapter (optional) (IA-20) |
|
| Scanning area
|
24.3 x 36.5 mm (2,592 x
3,894 pixels) |
|
| Aperture size
|
23.4 x 35.4 mm (35mm
strip)
16.1 x 27.4 mm (Advanced Photo System) |
|
| Illumination method
|
Condensed and diffused light
|
|
| Light source
|
RGB LED array |
|
| Color
separation |
RGB line sequential
|
|
| Imaging
optics |
6 lenses in 4 groups
|
|
| Autofocus
|
Contrast detection by
CCD
Focusing area selectable
Manual focusing by
software-controlled servo |
|
| Data Transfer |
|
| Panel indicators
|
READY, BUSY and ERROR status
indicated by LED |
|
| Scanning software
|
Nikon Scan™ 2.5
|
|
| Interface
|
SCSI-II, SCAM
supported
SCSI connector: 50-pin half-pitch x 2
SCSI ID
switch: Rotary switch
Terminator: Built-in active
terminator
|
|
| Image transfer
|
Single-pass RGB line
sequential |
|
| Maximum transfer rate
|
3 MB/second |
|
| Firmware |
User downloadable from
www.nikontechusa.com |
|
| Platforms |
|
| Operating
Systems |
Mac® OS version 7.6 or
better (Not compatible with Apple iMac/iBook™)
Windows®
95, Windows® 98
Windows® NT 4.0 or later |
|
| Scanning/Signal Processing |
|
| Image scanning
|
CCD and optical systems
driven by stepper motor
Target fixed
Single-pass scan
|
|
| Scan time |
Approx. 20 sec.
(negative/positive)* |
|
| Optical density
|
3.0 dynamic range
|
|
| Thumbnail
scanning |
35mm strip film: 2 to 6
frames
Advanced Photo System film: 15/25/40 frames
|
|
| Batch scanning
|
Available with strip film
adapter (up to 6 frames) and Advanced Photo System film adapter
(up to 40 frames) |
|
| A/D conversion
|
10 bits |
|
| Output data
|
8 bits per color channel
|
|
| Digital ICE™
|
Automatic removal of surface
defects
User selectable** |
|
| Color
Management System |
Uses ICC standard profiles
to color match across input and output devices. Apple ColorSync®
and Microsoft ICM compatible |
|
* Does
not include host computer processing time.
** Color film
only.
|
| Operating Conditions
|
|
| Power
requirements |
100 - 240 VAC, 0.3 - 0.2A,
50/60 Hz |
|
| Environmental
|
Temperature: 50°F - 95°F
(10°C - 35°C)
Relative humidity: 20 - 85% (non-condensing)
|
|
| Dimensions (W x H x D)
|
3.4 x 5.6 x 10.8 in. (85 x
142 x 275 mm) |
|
| Weight |
Approx. 5 lbs. (2.4 kg)
|
|
| Product Number |
|
| 9234
|
SCSI cable,
SCSI host adapter (works with Windows and PCI Macintosh computers
including G3 and G4), Altamira Genuine Fractals™ 2.0 LE.
|
|
Coolscan III (LS-30) 
