Specifications |
|
Reading
System/Optics |
|
Film type |
35mm/Advanced Photo System
film (Advanced Photo System adapter optional)
(positive or negative, color or monochrome) |
|
Reading
resolution |
2,592-pixel monochrome
linear CCD
2,700 optical dpi |
|
Film adapter |
Slide mount adapter (MA-20)
Strip adapter (2 to 6 frames) (SA-20)
Advanced Photo System adapter (optional) (IA-20)
Auto slide feeder (optional) (SF-200) |
|
Scanning area |
24.3 x 36.5 mm (2,592 x
3,894 pixels) |
|
Aperture
size |
23.4 x 35.4 mm (35mm strip)
16.1 x 27.4 mm (Advanced Photo System) |
|
Illumination method |
Condensed and diffused light |
|
Light source |
RGB LED array |
|
Color
separation |
RGB line sequential |
|
Imaging
optics |
6 lenses in 4 groups |
|
Autofocus |
Contrast detection by CCD
Focusing area selectable
Manual focusing by software-controlled servo |
|
Data
Transfer |
|
Panel indicators |
READY, BUSY and ERROR status
indicated by LED |
|
Scanning software |
Nikon Scan™ 2.5 |
|
Interface |
SCSI-II, SCAM supported
SCSI connector: 50-pin half-pitch x 2
SCSI ID switch: Rotary switch
Terminator: Built-in active terminator
|
|
Image transfer |
Single-pass RGB line
sequential |
|
Maximum transfer rate |
3 MB/second |
|
Firmware |
User downloadable from
www.nikontechusa.com |
|
Platforms |
|
Operating
Systems |
Mac® OS version 7.6 or
better (Not compatible with Apple iMac/iBook™)
Windows® 95, Windows® 98
Windows® NT 4.0 or later |
|
Scanning/Signal
Processing |
|
Image
scanning |
CCD and optical systems
driven by stepper motor
Target fixed
Single-pass scan |
|
Scan time |
Approx. 20 sec.
(negative/positive)* |
|
Optical density |
3.6 dynamic range |
|
Thumbnail
scanning |
35mm strip film: 2 to 6
frames
Advanced Photo System film: 15/25/40 frames |
|
Batch
scanning |
Available with strip film
adapter (up to 6 frames), Advanced Photo System film adapter (up
to 40 frames) and auto slide feeder (up to 50 slides) |
|
A/D conversion |
12 bits |
|
Output data |
8 bits or 16 bits per color
channel |
|
Multi-sample scanning |
Scan 4 or 16 times for
reduced noise
User selectable* |
|
Digital ICE™ |
Automatic removal of surface
defects
User selectable** |
|
Color
Management System |
Uses ICC standard profiles
to color match across input and output devices. Apple ColorSync®
and Microsoft ICM compatible |
|
*
Does not include host computer processing time.
** Color film only.
|
Operating
Conditions |
|
Power
requirements |
100 - 240 VAC, 0.3 - 0.2A,
50/60 Hz |
|
Environmental |
Temperature: 50°F
- 95°F (10°C - 35°C)
Relative humidity: 20 - 85% (non-condensing) |
|
Dimensions (W x H x D) |
3.4 x 5.6 x 10.8 in. (85 x
142 x 275 mm) |
|
Weight |
Approx. 5 lbs. (2.4 kg) |
|
Product
Number |
|
9295 |
Includes SCSI cable, SCSI
host adapter (works with Windows and PCI Macintosh computers
including G3 and G4), Altamira Genuine Fractals™ 2.0 LE. |
|
|
SA-20
Strip Film Adapter |
|
Strip type |
35mm strip film with 2-6
frames (use of one frame requires slide mount adapter) |
|
Loading method |
Bare strip film loaded
automatically by motor |
|
MA-20
Slide Mount Adapter |
|
Mount size |
Width: Up to 2.0 inch (50.8
mm)
Thickness: 0.01-0.13 inch (1.0 - 3.2 mm) |
|
IA-20
Advanced Photo System Film Adapter (Optional) |
|
Film type |
15/25/40 frames with
Advanced Photo System cartridge |
|
Loading method |
Automatic loading by DC
motor |
|
Thumbnail scan time |
Approx. 80 sec. /25 frames
(Max. 100 sec.) |
|
Product number |
9284 |
|
SF-200
Auto Slide Feeder (Optional) |
|
No. of slides |
Up to 50 slides |
|
Loading method |
Automatic loading by DC
motor |
|
Loading/Unloading time |
Approx. 12 sec./slide |
|
Product number |
9286 |
|
FA-G1
Medical Slide Adapter (Optional - not shown) |
|
Allows
scanning of mounted medical microscope slides |
|
Product number |
9123 |
|